METHODS FOR IMPROVING THE TECHNOLOGY OF PREPARING THE FEEDING TAPE

Authors

  • Aytymbetov Seilbek Senior Teacher Karakalpak State University names Berdakh (Republic of Karakalpakstan, Nukus)
  • Jumanyazov Qadam Doctor of Technical Sciences Professor
  • Matismailov Saypilla Tashkent Institute of Textile and Light Industry (Republic of Uzbekistan, Tashkent)
  • Shuxrat Musirov Teacher Karakalpak State University names Berdakh (Republic of Karakalpakstan, Nukus)

DOI:

https://doi.org/10.51699/mjssh.v1i3.42

Keywords:

unevenness, parallelism, tape, linear density, grooved, cylinders

Abstract

The article presents the results of an experimental study of the drawing device of the draw frame for uniform stretching and reduction of unevenness, connection with ensuring the parallelization of the fibers, the tension force between the first and second pairs of rollers and cylinders

References

I.G. Borzunov. К.I. Badalov and others. Spinning of cotton and chemical fibers M. Light and food industry

F.М. Plehanov Technological processes of pneumomechanical spinning M. Legprombytizdat 1986

A.P. Pirmatov, S.L. Matismailov and others "Spinning technology" Textbook.-Tashkent. 2020.-360 pages.

Ashnin, N.M. KSL Мethod and device for a comprehensive assessment of the structure of the tape by the indicator of the work of rupture // Textile industry. - Moscow: 1987. - No. 11.

Downloads

Published

2022-04-09

How to Cite

Seilbek, A. ., Qadam, J. ., Saypilla, M. ., & Musirov, S. . (2022). METHODS FOR IMPROVING THE TECHNOLOGY OF PREPARING THE FEEDING TAPE. Modern Journal of Social Sciences and Humanities, 1(3), 35–38. https://doi.org/10.51699/mjssh.v1i3.42

Issue

Vol. 1 No. 3 (2022): April

Section

Articles